The Burris Veracity PH riflescope is known for its precision and reliability, but like any piece of equipment, it can occasionally encounter issues. One problem some users report is the elevation knob not resetting to zero. This can be frustrating, especially when zeroing your rifle or making adjustments in the field. This comprehensive guide will delve into the potential causes of this issue and provide detailed troubleshooting steps to help you get your Veracity PH back in top shape.
Understanding the Burris Veracity PH Elevation Knob
Before diving into troubleshooting, let's briefly understand the Veracity PH's elevation mechanism. The elevation knob is a critical component, allowing for precise vertical adjustments to your point of impact. It interacts with internal components within the riflescope to make these adjustments. A failure to reset typically indicates a problem within this intricate system. The precision engineering of the Veracity PH often means that minor issues can have significant effects.
Common Causes of Elevation Knob Reset Issues
Several factors could contribute to the elevation knob failing to reset on your Burris Veracity PH:
-
Loose or Damaged Components: Internal components, such as the elevation turret spring or the detent mechanism, may become loose or damaged over time due to recoil, rough handling, or even manufacturing defects. This can prevent the knob from returning to its zero position accurately.
-
Obstruction: Dirt, debris, or even a small piece of lint can sometimes interfere with the smooth operation of the internal mechanism. This is especially true in harsh environments or after significant use. It's surprisingly common to find minor obstructions that are enough to halt operation.
-
Improper Adjustment: In some cases, the knob might appear to not reset due to incorrect adjustments during initial zeroing. Double-checking the zeroing process can be crucial, as it's possible the knob is actually in the correct position but the adjustment seems off.
-
Manufacturing Defect: While less common, a manufacturing defect can sometimes be to blame. This is rare but should be considered, particularly if the issue appears immediately after purchase.
Troubleshooting Steps: How to Fix Your Burris Veracity PH Elevation Knob
Let's walk through the troubleshooting process step-by-step, addressing each potential cause:
1. Inspect for Obstructions
- Remove the Scope: Carefully remove the Burris Veracity PH from your rifle.
- Visual Inspection: Thoroughly examine the elevation knob and any accessible parts. Use a magnifier if necessary, and be prepared to check crevices and small openings. Look for any foreign material or obvious signs of damage.
- Compressed Air: Use canned air to gently blow away any loose dust, debris, or lint that may be present. Avoid blowing too forcefully to avoid damaging sensitive internal parts.
2. Check for Loose Components
This step usually requires more advanced skill and tools. If you're not comfortable working with optics, consider sending it to a qualified gunsmith or Burris customer service.
- Disassembly (Advanced): If you're experienced in repairing optics, carefully disassemble the elevation knob assembly to inspect the internal components. Refer to the Burris Veracity PH manual or consult with a professional for proper disassembly techniques. Loose screws, worn springs, or any damaged parts should be addressed.
3. Verify Zeroing Procedure
- Re-Zero the Scope: If all internal parts seem to be in good condition, go through the proper zeroing process again, ensuring the correct methodology. You might find that the elevation knob is actually set to zero but simply appears visually off due to a miscalculation or error during the initial zeroing process.
4. Contact Burris Customer Service
If you've tried these steps and the elevation knob still isn't resetting correctly, it's time to contact Burris customer service. They can provide further guidance or even warranty repair if the issue is due to a manufacturing defect. Burris has a good reputation for handling warranty issues; always keep your proof of purchase.
Prevention Tips: Maintaining your Burris Veracity PH
- Regular Cleaning: Periodically clean your riflescope, using a lens cleaning pen and soft cloth to remove dust and dirt.
- Proper Storage: Store your riflescope in a safe, dry place to prevent damage.
- Avoid Impacts: Handle your riflescope with care, avoiding dropping or subjecting it to significant shocks or impacts.
Conclusion: Getting Your Veracity PH Back on Target
A non-resetting elevation knob on your Burris Veracity PH can be frustrating, but by following these troubleshooting steps, you can often resolve the issue. Remember to always prioritize safety and consider seeking professional help if needed. Maintaining your scope properly will help prolong its lifespan and prevent such problems from occurring in the future.